Disconnect the audio system from the power
source before performing any maintenance.
Cleaning
Clean the exterior of the system using a soft dust
cloth.
CD Player
CAUTION! This unit operates with laser and may
only be opened by qualified technicians to avoid
accidents.
Handling CDs
• Do not touch the recorded surface. Hold the
CD by the perimeter or by the perimeter and
the inner edge.
• Do not affix labels or adhesive tapes to the
label surfaces.
• Do not scratch or damage the label.
CDs rotate at high speeds inside the player.
• Do not use damaged (cracked or warped) CDs
Cleaning CDs
• Dirty CDs can cause poor sound quality. Always
keep CDs clean by wiping them gently with a
soft cloth from the inner edge toward the
outer perimeter.
• If a CD becomes dirty, wipe it clean gently with
a wet, soft cloth. Then wipe dry with a dry
cloth.
• Do not use record cleaning sprays or antistatic
agents on CDs. Also, never clean CDs with
benzene, thinner, or other volatile solvents
which may cause damage to disc surface
CD Lens Care
When your CD lens gets dirty it can also cause the
system to output poor sound quality. To clean the
lens you will need to purchase a CD lens cleaner
which can maintain the output sound quality of
your system. For instructions on cleaning the CD
lens, refer to the ones accompanying the lens
cleaner.
Technical Specifications
Power supply: 120V~60Hz
Dimensions ( H x W x D mm):
Main unit - 374 x 310 x 495
Speaker - 374 x 286 x 495
Subwoofer - 374 x 261 x 495
CD player: Response curve (+/- 2dB): 60Hz to 5kHz
Rating Plate: Refer to the back of the set.
18
EN
Maintenance
To Next Page
Loading...
Need help?
General
