Re WG251 SKB-B RESMART User Manual

Re S.p.A. WG251 SKB-B RESMART
Rev. 05/15 7/25
Sensor positioning
Caution!
When calibrating or using the webguide, if you need to adjust the
position of the sensor we strongly advise you to make the adjustment
when the webguide and the material are NOT moving!
 Application with a micrometer bar
 Move the sensor by turning the micrometer bar knob until the required position is reached.
 Application without a micrometer bar
 Slacken the knob located under the sensor.
 Move the sensor until it reaches the required position.
 Screw up the knob to lock the sensor.
Knob for the
sensor fixing
Knob for the sensor
positioning

Re WG251 SKB-B RESMART Specifications

General

Brand	Re
Model	WG251 SKB-B RESMART
Category	Industrial Equipment
Language	English