Installation | 21
3.8 AC INPUT AND OUTPUT CONNECTIONS
If the status LED is blue, switch the unit OFF and plug in the AC cord(s) into the Inverter's AC input and
output ports.
Once the AC Input and Output connections are made, the Inverter is ready for use. Switch the Main
Switch to the 'ON' or 'REMO' position depending on your conguration.
Figure 13: Connecting AC Input Figure 14: Connecting AC Output
3.9 MAINTENANCE
Turn the unit OFF before cleaning. Very little maintenance is required to keep the inverter operating
correctly. The exterior of the inverter should be cleaned periodically with a damp cloth to prevent
accumulation of dust and dirt. At the same time, tighten the screws on the DC Input and Chassis Ground
terminals. A vacuum cleaner can be used to remove dust from ventilation openings and fan area.
To Next Page
Loading...
Need help?
General
