BONNET (2/2)
Closing the bonnet
Before closing the bonnet, check to
make sure that nothing has been left in
the engine compartment.
To close the bonnet, replace stay 4
back into its holder 5, hold the bonnet in
the middle and lower it to 20 cm above
the closed position, then release it. It
will latch automatically under its own
weight.
Check that the bonnet is
properly closed and ensure
that nothing is obstruct-
ing the catch (gravel, cloth,
etc.).
4
5
Make sure nothing is left
in the engine compartment
(cloth, tools, etc.).
These may damage the
engine or cause a fire.
To Next Page
Loading...
Need help?
General
