lighting:
exterior ............................................(up to the end of the DU)
lights:
dipped beam headlights ...................................(current page)
lights:
side lights .........................................................(current page)
lights:
main beam headlights ......................................(current page)
lights .....................................................(up to the end of the DU)
signals and lights ..................................(up to the end of the DU)
control instruments ...............................(up to the end of the DU)
EXTERIOR LIGHTING AND SIGNALS (1/2)
u
Side lights
Turn the end of stalk 1 until the
symbol is opposite mark 2.
k
Dipped beam
headlights
Turn the end of stalk 1 until the symbol
is opposite mark 2.
An indicator light on the instrument
panel will come on.
á
Main beam headlights
With stalk 1 in dipped beam
headlights position, move the stalk to-
wards you.
When the main beam headlights are lit,
an indicator light lights up on the instru-
ment panel.
To return to the dipped beam headlight
position, pull the switch stalk towards
you.
e
Switching off the lights
Return the end of stalk 1 to its
initial position.
Lights-on reminder buzzer
A warning buzzer will sound when a
front door is opened and the lights
are left on after the ignition has been
switched off (to prevent discharge of
the battery).
Before driving at night, check that the electrical equipment is operating
correctly and adjust the headlight beams (if your vehicle is not carrying
its normal load).
Check that the lights are not obscured (by dirt, mud, snow or objects
which could cover them).
1
2
To Next Page
Loading...
Need help?
General
