WINDSCREEN WASH/WIPE, DE-ICING (2/3)
2
Y
Rear screen wiper
(depending on vehicle)
With the ignition on, turn the end of
stalk 1 to align the symbol with mark 2.
p
Rear screen washer/
wiper
(depending on vehicle)
With the ignition on, turn the end of
stalk 1 to align the symbol with mark 2.
When the stalk is released, it returns to
the rear wipe position.
Before using the rear wiper, check
that no object is obstructing the
travel of the blade.
In frosty weather, make sure that
the wiper blades are not stuck by ice
(to avoid the risk of the motor over-
heating).
Keep an eye on the condition of the
blades. Replace the wiper blades as
soon as they begin to lose efficiency
(approximately once a year).
Regularly clean your rear screen.
1
To Next Page
Loading...
Need help?
General
