Renesas RL78/G13 Operation

RL78/G13 Clock Generator (Clock Switching) CC-RL
R01AN2831EJ0100 Rev. 1.00 Page 44 of 51
May 28, 2015
5.8.20 Getting Parameters of Channel 0 of TAU0
Figure 5.21 shows the flowchart for getting parameters of channel 0 of TAU0.
Figure 5.21 Getting Parameters of Channel of TAU0
return
R_TAU0_Channel0_GetParamete
r
HOCO
default
X1 oscillation
XT1 oscillation
Current clock status?
Set parameters for X1 oscillation
 Set up X1 oscillation time (20 MHz) parameters as the
frequency division ratio and count
Set parameters for XT1 oscillation
 Set up XT1 oscillation time (32.768 kHz) parameters as the
frequency division ratio and count
Set parameters for HOCO
 Set up HOCO (32 MHz) parameters as the frequency
division ratio and count
[Argument]
 Clock status
 Frequency division ratio and count of channel 0
operation clock of TAU0

Renesas RL78/G13 Specifications

General

Brand	Renesas
Model	RL78/G13
Category	Computer Hardware
Language	English