Reolink RLN8-410 User Manual

Reolink PoE NVR
User Manual
53
Cause 3. Incorrect power supply for the NVR.
Solution:
(1) It might be the problem of the NVR’s power adapter. Please try again with a
different power outlet and power adapter.
Note: For the 8 channel PoE NVR the power adapter is 48V 1.87A. And for the 16 channel PoE
NVR, it’s 48V 2.5A.
(2) If you have a 12V DC adapter on hand, you may use the adapter to power the
camera and connect the camera directly to the router. Please check again whether
the camera displays video loss on your NVR.

Reolink RLN8-410 Specifications

General

Video codecs	H.264
Display modes	Live view
Number of users	20 user(s)
Maximum resolution	3840 x 2160 pixels
Video input channels	8 channels
Supported resolutions	3840x2160, 1920x1080, 1440x900, 1280x1024, 1280x800, 1280x720, 1024x768
On/off switch	Yes
Product color	Black
Audio RCA outputs	1
Networking standards	IEEE 802.3af, IEEE 802.3at
USB 2.0 ports quantity	2
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	9
Supported network protocols	HTTP, TCP/IP, UDP, DHCP, P2P, UPNP, RTSP, SMTP, SSL/TLS, DNS, DDNS, NTP, FTP
Power over Ethernet (PoE) ports quantity	8
Wi-Fi	No
HDD capacity	2000 GB
HDD interface	SATA, SATA II, SATA III
Maximum storage capacity	8 TB
Output current	2 A
Output voltage	48 V
Power consumption (max)	25 W
Operating temperature (T-T)	-10 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	230 mm
Width	260 mm
Height	41 mm
Weight	1200 g