REPLIGEN XCell ATF Series User Manual

XCell
TM
ATF System with C410:V4B Controller User Guide
118
General Information and handling Instructions
1. Repligen XCell™ ATF system is rated for acceptable sound levels (60 dBA)
2. Weight of C410 controller: E-Box 23 kg (50 lbs), P-Box 13 kg (28.6 lbs)
3. Complete system visual inspection for damage or potential risk to the operator,
surrounding personal, or equipment on a semi-annual basis
4. Annual Safety Inspection
o Conduct a vacuum system leak assessment
o Replace the air filter between the XCell™ ATF System and the Controller
o Inspect air and vacuum connections to the controller
o Inspect that all components inside of the controller are secured and intact
o Inspect enclosure for damage, locks and hinges for performance,
o Inspect the XCell™ ATF system housing components, especially the internal and sealing
surfaces for damage, rust, cracks, scoring
o Perform a pressure hold test of the XCell™ ATF System
Handling Instructions
Transportation: The XCell™ ATF controller E-Box weighs 23 kg (50 lbs, the Power-Box
weighs 12 kg (26 lbs) and the P-Box weighs 13 kg (29 lbs). Care should be taken when
lifting and transporting and use of a cart is recommended
Voltage: Hazardous voltage inside, disconnect power before opening

REPLIGEN XCell ATF Series Specifications

General

Brand	REPLIGEN
Model	XCell ATF Series
Category	Laboratory Equipment
Language	English