Rheem 862 27 Series User Manual

TM049 27L Continuous Flow Service Instructions
REV AL – Issued April 2019
This document is stored and maintained electronically by Rheem Technical Support. All printed copies are deemed “uncontrolled”.
83
DOCUMENT REVISION HISTORY
Title:
27 Continuous Flow Gas Water Heater Service Instructions
Document
Nº:
TM049
REV
Details of change
D.O.I.
A
Service Instructions issued
12/09
B
Updated gas conversion procedure
02/10
C
Name Badge part numbers added
05/10
Revised gas pressure adjustment procedure
D
Added outlet temperature compensation adjustment procedure
10/10
Increased min. outlet temp setting for inline boosting from 60 to 70ºC
E
6 Star product release. Added transformer primary winding resistance test
to FF chart, Edwards & Solahart models added
05/12
F
Revision to EZ-link information on pages 22 & 23
07/12
G
Error code 99 reset procedure added
11/12
H
Correction to spare part details - Item 17 & 17b on pages 72 & 73
12/12
I
Exploded views and replacement parts lists removed – Now form part of
Spare parts manual SPM-CFGWH
08/13
AJ
Addition of touch voltage test; updated test procedures 18-21; Revised
water body & PCB details added.
02/18
AK
EziSET
®
Smartphone remote control kit details added, Live Testing
warning and Overheat Limiter position instruction.
02/19
AL
Addition of In-Service Test procedure
04/19
NOTE: Every care has been taken to ensure accuracy in preparation of this publication. No liability can be
accepted for any consequences which may arise as a result of its application.

Rheem 862 27 Series Specifications

General

Brand	Rheem
Model	862 27 Series
Category	Water Heater
Language	English