Rheem Iconic RTGH-SR11i User Manual

IKONIC Tankless Water Heater Service Manual
67
3.4 GASKET
HOW TO REMOVE COMPONENTS
1. Remove the hook film part of the Over Heat Limiter
(OHL ). DO NOT cut the film.
2. Remove flame rod wire from the rod.
3. Remove 3 screws from flame rod bracket, and pull
the flame rod
4. The gasket is located between the heat exchanger
and flame rod bracket
NOTE: The spare gasket is located at lower
left in the unit.
Flame Rod
Igniter Rod

Rheem Iconic RTGH-SR11i Specifications

General

Brand	Rheem
Model	Iconic RTGH-SR11i
Category	Water Heater
Language	English