Ricoh Aficio MP 2851 User Manual

Staple position
The specified staple position varies depending on paper size, type, quantity and feed orientation. The
following table shows staple positions:
BDJ001S
• Stapling might not be in the specified position if combine (layout) and duplex printing are both
selected. After setting the staple position, use the printer driver's preview icon to check the position
before printing.
• For paper sizes and maximum numbers of sheets available for stapling, see "Specifications", General
Settings Guide.
• For printing methods, see the printer driver Help.
Stapling precautions
• Stapling can be done only with the optional finisher installed.
Staple printing will be canceled under the following conditions:
• If the number of pages to staple exceeds maximum.
• If a paper size that cannot be stapled is selected.
• If a paper type that cannot be stapled is selected.
• If positions other than those fixed for stapling are specified.
• If there are inconsistencies between the orientation in duplex mode and the staple position.
• If there are inconsistencies between the orientation in letterhead mode and the staple position.
Printing with the Finisher
103
3

Ricoh Aficio MP 2851 Specifications

General

Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 dpi
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
First Print Speed	4.5 seconds
Interface	USB 2.0, Ethernet
Max Paper Size	A3
Print Speed	28 ppm
Paper Capacity	1, 600 sheets max
Network Connectivity	Ethernet 10/100Base-TX
Warm-up Time	Less than 20 seconds
Copy Speed	28 cpm
Zoom	25% - 400%
Multiple Copy	Up to 999 copies
Paper Size	A3, A4, A5, B4, B5, A6
Memory	768 MB
PDL	PCL6, RPCS
Operating System Compatibility	Windows, Mac
Fax Transmission Speed	3 seconds