• When printing is completed, the stored file is deleted.
• To stop printing after printing has started, press [Exit] until the Printer screen appears, and then press
[Job Reset]. The file will be deleted.
• If you select multiple files, the confirmation screen displays the total number of files to be printed.
• For details about setting printer drivers, see the printer driver Help.
• You can also print or delete a Hold Print file from Web Image Monitor. For details, see Web Image
Monitor Help.
Deleting Hold Print Files
1. Press the [Printer] key to display the Printer screen.
2. Press [Print Jobs].
A list of print files stored in the machine appears.
3. Press [Hold Print Job List].
A list of Hold Print files stored in the machine appears.
Depending on the security settings, certain print jobs may not be displayed.
4. Select the file you want to delete, and then press [Delete].
The delete confirmation screen appears.
5. Press [Yes] to delete the file.
The selected file is deleted.
If you do not want to delete the file, press [No].
• If you select multiple files, the confirmation screen displays the total number of files to be deleted.
Stored Print
Use this function to store a file in the machine, and then print it from the computer or the machine's control
panel later.
Jobs are not deleted after they are printed, so the same job need not be re-sent in order to print multiple
copies.
• A Stored Print file cannot be stored if:
• the total number of Sample Print, Locked Print, Hold Print, and Stored Print files in the machine
is over 100. (The maximum number varies depending on the volume of data in files.)
Printing from the Print Job Screen
85
To Next Page
Loading...
Need help?
General
