T
echnical
B
ulletin
PAGE: 1/3
Reissued: 7-May-03
Model:
Model U-P1
Date:
3-Feb-03
No.:
RG071003a
RTB Reissue
The items in bold italics have been added or changed.
Subject:
Firmware History - Main Unit Controller
Prepared by:
H.K.
From:
1st Tech. Support Sec. Service Support Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other (Firmware History)
Main Unit Controller firmware history.
Part No. Program name
G0705940 Version C.SUM Production
M G0705941M.bin
G0705940M.bin
V2.26 211D
FD70
April Production ‘03
L G0705941L.bin
G0705940L.bin
V2.25 FCB9
A00C
March Production ‘03
K G0705941K.bin
G0705940K.bin
V2.24 6E31
EF54
February Production ‘03
J V2.22.1 - January Production ‘03
H - V2.22 - November Production
‘02
G - V2.21 - Not applied to the
production machines
F - V2.20 - Not applied to the
production machines
E - V2.19 - Not applied to the
production machines
D - V2.18 - August production ‘02
Note for updating test marketing machines (PMO) firmware:
Default values of the fusing temperature (SP1-105), paper transfer currents (SP2-310-001 to SP2-
314-032), and paper transfer adjustment (SP2-903-01) have been reviewed. When firmware is
updated to V2.20 or later for the first time, please check these settings. If the settings are still the
old ones, please set the type to 0 and press the # key in SP2-905-01 and SP1-905-01. For details,
please refer to the corrected symptom explanations in V2.20 and V2.18 (pp. 2, 3 below).
August '02 production serial numbers:
! G071-17: P75268xxxxx
11 units were shipped to the US market as the test marketing machines (PMO).
! G071-27: P75268xxxxx
11 units were shipped to RDG fields as the test marketing machines (PMO).
To Next Page
Loading...
Need help?
General