137
Various Shooting Functions
1
You can prevent camera shake by turning on the camera shake
correction function.
At the time of purchase, the camera shake correction function is
turned on.
1
Displaying the shooting menu.
• For the operating procedure, see P.103.
2
Press the " button to select [Camera Shake Cor] and
press the $ button.
3
Press the !" buttons to select
[On].
4
Press the MENU/OK button.
• The symbol appears on the screen.
Caution------------------------------------------------------------------------------------------
• In multi-shot mode or manual exposure mode, when the shutter speed is set to 1 or
more seconds, the camera shake correction function cannot be used. When the
camera shake correction function is turned on in multi-shot mode or the shutter speed
is set to 1 or more seconds in manual exposure mode, E changes to F.
• The camera shake correction function does not work in movie mode. If you select 3
[Movie] in scene mode, the E display disappears.
• The camera shake correction function cannot prevent movement of the shooting
subject (caused by wind, etc.).
• Effects of the camera shake correction function vary depending on the surroundings.
Note ----------------------------------------------------------------------------------------------
The J symbol appears when camera shake is likely to occur. (GP.44)
Using the Camera Shake Correction
Function to Prevent Camera Shake
(Camera Shake Cor)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
