82
Various Shooting Functions
1
Assigning the Fn1/Fn2 button to [AE Lock] (GP.195) and then
pressing the Fn1/Fn2 button during shooting allows you to lock or
cancel the exposure.
1
Set [Set Fn1/2 Button] to [AE Lock] on the setup menu.
• For the operating procedure, see P.195.
2
Check that the camera is ready to shoot.
3
Put the subject of your photo in the center of the screen
and press the Fn1/Fn2 button.
• The exposure is locked and the AEL
symbol, aperture value, and shutter
speed appear on the screen.
• Pressing the Fn1/Fn2 button again
cancels the AE lock.
Note ----------------------------------------------------------------------------------------------
• The exposure continues to remain locked even after you shoot a picture.
• The AE lock does not work in manual exposure mode even if the Fn1/Fn2 button is
assigned to [AE Lock]. When the Fn1/Fn2 button is pressed, the value is automatically
set closer to the appropriate exposure (closer to the center of the exposure value
indicator). This is useful when, for example, you want to change/adjust the exposure
value from closer to the center of the exposure value indicator (the appropriate
exposure).
Locking the Exposure (AE Lock)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
