11
1. Getting Started
Guide to Components
1.
Exposure glass cover
Lower this over originals.
2.
Auto Document Feeder
See p.13 “Other Items”.
3.
Exposure glass
Place originals face down here.
4.
Internal tray
Copied, printed paper, or fax messages
are delivered here.
5.
Ventilation holes
Prevent overheating. Do not obstruct
these by placing objects near them or
leaning things against them. If the ma-
chine overheats, a fault might occur.
6.
Main power switch
If the machine does not operate after
turning on the operation switch, check
the main power switch is turned on. If it
is off, turn it on.
7.
Main power indicator
Lights when the main power switch is
turned on, and goes off when the switch
is turned off.
ABU203S
StellaC2_AEzen_F_FM.book Page 11 Monday, December 22, 2003 2:15 PM
To Next Page
Loading...
Need help?
General
