When Memory Is Full
Message Causes Solutions
"Memory is full. [Print]
scanned orig., [Clear] to
cancel/clear memory."
[Clear] [Print]
• Copying will stop and
this message will be
displayed when the
memory is full.
The scanned original
exceeds the number of
pages that can be stored in
memory.
Press [Print] to copy scanned originals
and cancel the scanning data. Press
[Clear] to cancel the scanning data and
not copy.
"Memory is full. Cannot
scan."
Memory reached capacity. Reduce the number of originals, and
then try print or copy again.
"Reset * orig., then press
[Resume] to scan and copy
the remaining originals."
[Stop] [Resume]
The machine checks if the
remaining originals should
be copied, after the
scanned original has been
printed.
To continue copying, remove all copies,
and then press [Resume]. To stop
copying, press [Stop].
If You Cannot Make Copies As You Want
101
To Next Page
Loading...
Need help?
General
