Accessing User Tools
This section is for administrators in charge of this machine.
User Tools allow you to change or set defaults.
• Operations for system settings differ from normal operations. Always quit User Tools when you
have finished. See page 78 "Quitting User Tools".
• Selected settings are highlighted.
• Any changes you make with User Tools remain in effect even if the main power switch or operation
switch is turned off, or the [Reset] key is pressed.
Changing Default Settings
• If an administrator code is already set, the administrator code entry display appears. Enter the
administrator code, and then press the [OK] key. See page 82 "Administrator Tools".
1. Press the [User Tools/Counter] key.
2. Select [System Settings] or [Copier Features] using the [ ] or [ ] key, and then press the
[OK] key.
• page 73 "User Tools Menu (System Settings)"
Accessing User Tools
77
To Next Page
Loading...
Need help?
General
