Engine SP Mode
SM 5-27 D245/D246/D247
Maintenance
5.2.3 SP3-XXX (PROCESS)
There are no Group 3 SP modes for this machine.
5.2.4 SP4-XXX (SCAN)
4008 [Sub Scan Mag Adj]
Adjusts the sub-scan magnification by changing the scanner motor speed.
4-008-001
- ENG [-1.0 to 1.0 / 0.0 / 0.1 % / step]
4010 [L-Edge Regist Adj]
Adjusts the leading edge registration for scanning.
4-010-001
- ENG [-2.0 to 2.0 / 0.0 / 0.1 mm / step]
4011 [S-Edge Regist Adj]
Adjusts the side-to-side registration by changing the scanning start timing in
the main scan direction.
4-011-001
- ENG [-2.0 to 2.0 / 0.0 / 0.1 mm / step]
4012 [FB Erase ForSP]
Adjusts scanning margins for the leading and trailing edges (sub scan) and
right and left edge (main scan) in the book scanning mode.
ï‚§ Do not adjust unless the customer desires a scanner margin
greater than the printer margin.These settings are adjusted to
erase shadows caused by the gap between the original and the
scale of the scanner unit.
4-012-001
Book:LeadingEdge ENG [0.0 to 3.0 / 1.0 / 0.1 mm / step]
4-012-002
Book:TrailingEdge ENG [0.0 to 3.0 / 0.0 / 0.1 mm / step]
4-012-003
Book: Left ENG [0.0 to 3.0 / 1.0 / 0.1 mm / step]
4-012-004
Book: Right ENG [0.0 to 3.0 / 0.0 / 0.1 mm / step]