Ricoh MP 2014D User Manual

SC Code Descriptions
SM 6-9 D245/D246/D247
Troubleshooting
6.2.3 SC3XX: IMAGE PROCESSING
SC No. Level Error Name/Error Condition/Major Cause/Solution
302-00 B High voltage charge error
The machine detects "1" (error) 10 times consecutively when
monitoring the output error signal every 20 msec (excluding in
Sleep mode or with the front door open).
 PCDU defective
 HVPS board harness defective
 Replace the PCDU.
 Replace the harness of the HVPS board.
SC No. Level Error Name/Error Condition/Major Cause/Solution
350-00 B ID sensor error (detailed)
One of the conditions below occurs during the ID sensor
detection (only when the SP5-995-001 is set to “1”).
 Vsp > 2.5V
 Vsg < 2.5V
 Vsp = 0V
 Vsg = 0V
 ID sensor defective
 ID sensor harness damaged.
 ID sensor not connected correctly.
 MPU defective
 Laser unit defective
 Imaging density fault
 HVPS board defective
 ID sensor dirt
 Clean the ID sensor
 Replace the ID sensor.
 Replace and reset the ID sensor harness.
 Replace the MPU.
 Replace the HVPS board.

Ricoh MP 2014D Specifications

General

Print Technology	Laser
Print Resolution	600 x 600 dpi
Scan Resolution	600 dpi
Paper Capacity	250 sheets
Duplex Printing	Manual
Connectivity	USB 2.0
Type	Monochrome
Maximum Paper Size	A3
Power Source	220 - 240 V, 50/60 Hz
Dimensions	587 x 581 x 461 mm
Weight	29 kg
Functions	Print, Copy, Scan
Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Copy Speed	20 cpm
Power Consumption	Approx. 1.2 kW