Ricoh MP 2553 Series User Manual

1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
CXV013
2. Square the paper and load it print side up.
Do not stack paper over the limit mark.
CXV015
3. Carefully push the paper tray fully in.
• Various sizes of paper can be loaded in the paper trays by adjusting the positions of side fences
and end fence. For details, see "Changing the Paper Size in Paper Trays", Paper Specifications and
Adding Paper.
•
You can load envelopes in Tray 1. When loading envelopes, place them in the correct orientation.
For details, see page 161 "Envelopes".
Loading Paper into the Bypass Tray
Use the bypass tray to use OHP transparencies, adhesive labels, translucent paper, and paper that
cannot be loaded in the paper trays.
9. Adding Paper and Toner
142

Ricoh MP 2553 Series Specifications

General

Brand	Ricoh
Model	MP 2553 Series
Category	All in One Printer
Language	English