8. Press [OK].
9. Close the initial settings screen.
•
When using the standard operation panel
Press the [User Tools/Counter] key.
• When using the Smart Operation Panel
Press [User Tools/Counter] (
) on the top right of the screen.
• We recommend that you use specified OHP transparencies.
•
For details about paper thickness, see "Tray Paper Settings", Connecting the Machine/ System
Settings.
Loading Paper into Large Capacity Tray (LCT)
(mainly Europe and Asia)
The LCT can hold A4 paper only. If you want to print on 8
1
/
2
× 11 from the LCT, contact your
service representative.
(mainly North America)
The LCT can hold 8
1
/
2
× 11 paper only. If you want to print on A4 from the LCT, contact your
service representative.
• When paper loaded in the right side of the LCT runs out, paper on the left is automatically shifted to
the right. Do not pull out the LCT while the tray is moving paper; wait until sounds stop coming from
the tray.
•
For the right stack, align the right edge of the paper with the right edge of the tray. For the left
stack, align the left edge of the paper to the left edge of the tray.
9. Adding Paper and Toner
148
To Next Page
Loading...
Need help?
General
