To Next Page

To Previous Page

About the Scanner Functions

This section describes functions you can use in the scanner mode.

For details about each function, see respective chapters.

❖ Sending scanned files

There are several methods you can use to send captured data as files to com-

puters.

• Sending scan files by e-mail

For details, see chapter 1 "Sending Scan Files by E-mail".

• Sending scan files to a shared folder

For details, see chapter 2 "Sending Scan Files to Folders".

• Sending scan files to an FTP server

For details, see chapter 2 "Sending Scan Files to Folders".

• Sending scan files to a NetWare server

For details, see chapter 2 "Sending Scan Files to Folders".

• Delivering scan files using the delivery server

For details, see chapter 4 "Delivering Scan Files".

❖ Scanning originals using the TWAIN driver

Use the TWAIN driver to specify the machine where originals will be scanned

from a client computer. For details, see chapter 5 "Scanning Originals with the

Network TWAIN Scanner".

❖ Storing files

You can store scan files on the machine's hard disk. Stored files can be sent

later. For details, see chapter 3 "Storing Files Using the Scanner Function".

Reference

p.11 “Sending Scan Files by E-mail”

p.37 “Sending Scan Files to Folders”

p.83 “Delivering Scan Files”

p.101 “Scanning Originals with the Network TWAIN Scanner”

p.61 “Storing Files Using the Scanner Function”

Ricoh Scanner User Manual

Other manuals for Ricoh Scanner