To Next Page

To Previous Page

Sending Scan Files to Folders

Simultaneous Storage and Sending by

Scan to Folder

This section explains how to store a file and simultaneously send it by Scan to

Folder.

A Press [Store File].

B Make sure that [Send & Store] is selected.

C If necessary, specify file data, such as [User Name], [File Name], and [Password].

For details, see "Specifying File Information for a Stored File".

D Press [OK].

E Specify the setting for sending the file by Scan to Folder, and then send the

file.

For details about sending a file by Scan to Folder, see "Basic Operations When

Using Scan to Folder".

Note

❒ Depending on the security setting, [Access Privileges] may appear instead

of [User Name]. For details about specifying [Access Privileges], consult the

administrator.

❒ If you simultaneously store scan files and send them by Scan to Folder, the

files cannot be retransmitted from the Scan to Folder screen. To retransmit

the files, select the files on the Select Stored File screen, and then send

them. For details, see "Sending a Stored File".

Reference

p.66 “Specifying File Information for a Stored File”

p.43 “Basic Operations When Using Scan to Folder”

p.75 “Sending a Stored File”

Ricoh Scanner User Manual

Other manuals for Ricoh Scanner