145
7. Appendix
The appendix details specifications of the scanner function and explains supple-
mentary settings.
Relationship between Resolution and
Original Size
This section explains the relationship between resolution and original size.
Resolution and original size are inversely related. The higher the resolution (dpi)
is set, the smaller the area that can be scanned. Conversely, the larger the scan
area, the lower the resolution that can be set.
The relationship between the scanning resolution and the original size is shown
below. If the combination is unreadable,
"Exceeded max. data capacity.
Check the scanning resolution, then press Start again." appears on
the machine's control panel display. Change the condition until scanning is en-
abled.
Note
❒ Image compression level can limit Maximum image size.
To Next Page
Loading...
Need help?
General