Rigol DS7000 Series User Manual

RIGOL Chapter 1 Quick Start
1-28 MSO7000/DS7000 User Guide
Rectangle Drawing
Enable the function navigation, and then tap the "Draw rect" icon to switch to the
rectangle drawing mode. Drag a finger from upper left to lower right across the
screen to draw a rectangle on the screen, as shown in Figure 1-19 (a). Move your
finger away from the screen, and then a menu is displayed on the screen. At this
time, you can tap to select "Trigger zone A", "Trigger zone B", "Histogram",
"Horizontal zoom in", "Vertical zoom in", or "Waveform zoom in". Drag a finger from
lower right to upper left across the screen to draw a rectangle on the screen, as
shown in Figure 1-19 (b). Move your finger away from the screen, and then a menu
is displayed on the screen. At this time, you can tap to select "Trigger zone A",
"Trigger zone B", "Histogram", "Horizontal zoom out", "Vertical zoom out", or
"Waveform zoom out".
(a) (b)
Figure 1-19 Rectangle Drawing Gesture
 Select "Trigger zone A":
 Draw the region for Trigger zone A;
 Open Trigger zone A;
 Open the "Zone Trigger" menu.
 Select "Trigger zone B":
 Draw the region for Trigger zone B;
 Open Trigger zone B;
 Open the "Zone Trigger" menu.
 Select "Histogram":
 Draw the region for the histogram;
 Open the "Histogram" menu.
 Select "Horizontal zoom in": expands the waveforms in the horizontal direction.
Select "Horizontal zoom out": compresses the waveforms in the horizontal
direction.
 Select "Vertical zoom in": expands the waveforms in the vertical direction. Select
"Vertical zoom out": compresses the waveforms in the vertical direction.
 Select "Waveform zoom in": expands the waveforms both in the horizontal and
vertical direction. Select "Waveform zoom out": compresses the waveforms both
in the horizontal and vertical direction.

Rigol DS7000 Series Specifications

General

Brand	Rigol
Model	DS7000 Series
Category	Test Equipment
Language	English