Chapter 1 Quick Start RIGOL
RSA5000 User Guide 1-29
Mode Setting
Mode
Provides two working modes: GPSA (general purpose spectrum analyzer) and RTSA
(real-time spectrum analyzer).
Note: In different working modes, the functions of the keys on the front panel may
be different. Press Help to display the help information of the current working mode.
If you need help information for other modes, exit the help interface first. Then
select the desired working mode and obtain the corresponding help information.
1. GPSA
GPSA adopts two analysis methods: swept and FFT. GPSA can not only carry out
frequency domain analysis, but also time domain (zero span) analysis.
Select GPSA. In this working mode, press Meas to select multiple
measurements. For details, refer to Chapter 2.
2. RTSA
RTSA provides the analysis function for the real-time signal, which can capture
the complex signal seamlessly.
Select RTSA. Select RTSA. In this working mode, you can also press Meas to
select multiple measurements. For details, refer to Chapter 3.
To Next Page
Loading...
Need help?
General
