EasyManuals Logo

Rinnai V75i User Manual

Rinnai V75i
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
24 Value Series Manual
Technical Data
Specicaons
* Minimum ow may vary slightly depending on the temperature seng and the inlet water temperature.
Minimum acvaon ow is 0.4 GPM (1.5 L/min).
Our products are connually being updated and improved; therefore, specicaons are subject to change without prior
noce.
The maximum inlet gas pressure must not exceed the value specied by the manufacturer. The minimum value listed is for
the purpose of input adjustment.
V75i V65i V75e V65e
Minimum Gas Consumpon Btu/h 10,300
Maximum Gas Consumpon Btu/h 180,000 150,000 180,000 150,000
Hot water capacity (Min - Max) *
0.26 - 7.5 GPM
(1.0 - 28.5 L/min)
0.26 - 6.6 GPM
(1.0 - 25.0 L/min)
0.26 - 7.5 GPM
(1.0 - 28.5 L/min)
0.26 - 6.6 GPM
(1.0 - 25.0 L/min)
Temperature Seng (no controller) 120° F (49° C) or 140° F (60° C)
Maximum Temp Seng (residenal) Selectable at 120° F (49° C) or at 140° F (60° C)
Minimum Temperature Seng 98° F (37° C)
Weight 45.6 lb (20.7 kg) 43.6 lb (19.8 kg)
Energy Factor 0.82
Noise level 49 dB (excluding start up or shutdown)
Electrical
Consumpon
Normal 76 W 76 W 57 W 57 W
Standby 2 W
An-frost
Protecon
120 W 104 W
Max Current
Without recirculaon pump: 4 A
With recirculaon pump: 8 A (exact value depends on the pump)
Fuse 10 A
By-Pass Control Fixed
Gas Supply Pressure
Natural Gas 4.0 - 10.5 inch W.C.
Propane 8.0 - 13.5 inch W.C.
Type of Appliance Direct Vent, Tankless, Temperature controlled connuous ow gas hot water system
Connecons Gas Supply: 3/4" MNPT, Cold Water Inlet: 3/4" MNPT, Hot Water Outlet: 3/4" MNPT
Ignion System Direct Electronic Ignion
Electric Connecons
Appliance: AC 120 Volts, 60Hz.
Temperature Controller: DC 12 Volts (Digital)
Water Temperature Control Simulaon Feedforward and Feedback
Water Supply Pressure Minimum Water Pressure: 50 PSI (Recommended 60-80 PSI for maximum performance)
Maximum Water Supply Pressure 150 PSI
Temperature Control Cable Non-Polarized Two Core Cable (Minimum 22 AWG)
Energy Star Qualied Yes
Cered for installaon in
manufactured (mobile) homes
Yes
NOx
Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission
levels

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rinnai V75i and is the answer not in the manual?

Rinnai V75i Specifications

General IconGeneral
BrandRinnai
ModelV75i
CategoryWater Heater
LanguageEnglish

Related product manuals