18 Rockwell Automation Publication CC-QS034C-EN-P - March 2015
Chapter 1 PowerFlex Compact-class AC Drive Setup
Connect to Your Drive
Follow these steps to connect to your drive by using Connected Components Workbench software.
1. Open the starting PowerFlex AC Drive Device Building Block Connected Components Workbench project or the
Connected Components Accelerator Toolkit (CCAT) version 2.0 generated project. Use the ‘change controller’
feature, if necessary, to match your Micro800 controller catalog number. Refer to the software help for instructions
on using change controller feature.
2. In the Connected Components Workbench Device Toolbox, expand Discover, and click Browse Connections.
3. From the Connection Browser dialog box, select your drive (01, AB DSI) and click OK.
To Next Page
Loading...
Need help?
General
