Rockwell Automation PanelView Plus 700 User Manual

164 Publication 2711P-UM001I-EN-P - December 2008
Chapter 6 Install and Replace Components
PanelView Plus 700 to 1500 Terminals
The F1-Fxx and K1-Kxx legend inserts on the PanelView Plus 700 to
1500 terminals are accessible when the display module bezel is
removed.
1. Remove power from the terminal.
2. Remove the display module bezel.
3. Pull the legend inserts out from the slots on the bezel.
4. Slide the new legend strips into the same slots until only the end
tab is visible.
5. Replace the display module bezel.

Rockwell Automation PanelView Plus 700 Specifications

General

Brand	Rockwell Automation
Model	PanelView Plus 700
Category	Touch terminals
Language	English