Rockwell Automation PanelView Plus 700 User Manual

Publication 2711P-UM001I-EN-P - December 2008 89
Configuration Mode Chapter 4
Enable or Disable the Cursor on Touch Screens
You can enable or disable the cursor on terminals with a touch screen.
Disabling the cursor will not disable the mouse.
1. Select Terminal Settings>Input Devices>Touch Screen>Cursor.
2. Press the Enable Cursor button to enable or disable the cursor.
3. Press OK.

Rockwell Automation PanelView Plus 700 Specifications

General

Brand	Rockwell Automation
Model	PanelView Plus 700
Category	Touch terminals
Language	English