Auditioning
the
Sounds
Contained within the JV-30
is a comprehensive
selection of Tones.
Follow the
instructions below
to select those you are
interested in and
hear howthey
sound.
Part
Number Tone Name
P: l~i
Bank
|
Number
P : Preset Tone
U
: User Tone
Preset
Tones
This Tone Group
contains all the Tones that
were stored in the unit when it was
manufactured. The
Preset Tones are
organized into 16 Banks, each having 8
Numbers. The Bank
Name is displayed on the
upper right of the front panel, so
that you'll know
what of Tone is in a
particular Bank.
These
128 Tones, which can be
selected using BANK buttons
[l!-[16! and
NUMBER
buttons
11]-[8],
are referred to as "Capital Tones."
User
Tones
This
Tone Group contains all the
Tones that have been altered to your liking. Any
Tone that you
have made changes to,
whether it was originally
a
Preset or
a
User
Tone, can be
saved as a User Tone
that is identified
by
means of BANK/NUMBER
system.
[Selecting Tones]
®
r
'
PftfS€T ;
:
1
^
li !
uEEft
fi
j
1(71
PffiMWWJC*—
> ;
1 1 i
1 1
3 4
1
1
1
S
10 11
12
1
1
if::ii:ii:i
s t 7 »
1
-
1
1
1 1
r r
14 IS 16
l\ / 1
1
1 1
lJ"f"ii'''"
111
5
<T)
Press [PRESET] to select
a
Preset Tone.
To select a User Tone, press [USER].
Selections can
be
made from the Tone Group where
the
indicator
is lit.
@
Using BANK
[1]-[16],
select the Bank.
©
Using NUMBER
[1]-18],
select the desired Number.
The indicator on the button which has been pressed will be lit.
Now, play
the keyboard, and
it
will sound using the selected Tone.
*
Any button, whether it be [PRESETi/[USER], [BANK] or [NUMBER], will result in an
immediate change to a new Tone if pressed.
*
Try playing as many of the sounds as you wish, while referring to ttie "Tone Table"
(»
p.52).
IP
To Next Page
Loading...
Need help?
General
