Roland JX-08 User Manual

Selecting a Tone (Patch)
20
Using the Keyboard Split to Play Different Parts (SPLIT Mode)
In SPLIT mode, the keyboard is divided into two zones, and either PART A or PART B plays depending on which zone you play in.
All notes you play in the lower zone of the keyboard at or below the position on the keyboard that divides the zones (called the
“split point”) play PART A, and all notes played in the higher zone play PART B.
1. Press the [SPLIT] button to make the indicator light.
SPLIT mode turns on.
Changing the position that divides the zones (split point)
You can change the split point on this unit.
1. Press the [MENU] button.
The MENU screen appears.
2. Use the [VALUE] knob to select “KEY,” and press the [VALUE] knob.
The KEY setting screen appears (11.2. Keyboard Settings(P.40)).
3. Use the [VALUE] knob to select “SPLt,” and press the [VALUE] knob.
4. Use the [VALUE] knob to select the split point (key).
When a K-25m is connected, you can hold down the [SPLIT] button and press a key to set the split point.
5. To exit the settings, press the [MENU] button.

Roland JX-08 Specifications

General

Product type	Digital synthesizer
Product color	Black
Sound effects	Chorus, Compression, Delay, Overdrive, Phaser, Pitch shift
Backlight color	Red
Backlight buttons	Yes
Sound effects quantity	12
Keyboard number of keys	-
Preset programs quantity	256
Reverberation effects quantity	4
Battery type	AA
Power source type	Battery, USB
Number of batteries supported	6
USB ports quantity	1