23
fig.daw03.eps
When you press the [ACT] button to turn on the ACT function, the button lights up and you can use the [R1]–[R4]
knobs to control the parameters of plug-ins that support the function.
You cannot control plug-ins that do not support the ACT function.
You can configure the parameters controlled by the four knobs in the VS-100 properties page.
ACT section
What is ACT?
ACT (Active Controller Technology) is a function for controlling SONAR from external devices such as
MIDI controllers or control surfaces. Plug-in effects and synthesizers that are active on SONAR are
controlled automatically.
For more information, see the SONAR online Help.
Expanded ACT section
If you turn on the system setting “DAW Full Asgn,” you’ll be able to use not only the four knobs of the ACT
section but also the buttons and knobs of the “Input section” (p. 17) to control ACT-compatible plug-ins.
The names of the parameters being controlled are shown in the “VS-100 properties page” (p. 24).
For details on how to turn on the system setting “DAW Full Asgn,” refer to “System settings” (p. 52).
If “DAW Full Asgn” is turned on, you won’t be able to use the input section to control SONAR
V-STUDIO 100’s digital mixer functionality. If you want to adjust the mixer, you’ll need to turn “DAW
Full Asgn” off.
VS-100_r_e.book 23 ページ ２００９年３月２５日 水曜日 午前９時３４分
To Next Page
Loading...
Need help?
General
