26
Using the WAVE recorder
fig.mixer04.eps
When you turn on the power of the SONAR V-STUDIO 100 without connecting it to a computer, the [DAW/WAVE
RECORDER] button lights up and you can operate the WAVE recorder.
You can use the WAVE recorder to record signals that have been mixed in the digital mixer section.
If you change the system setting “WAV-Rec Source,” you can also use the WAVE recorder to record only the
signals input to INPUT 1L/INPUT 2R. For more information, see
“Parameter list”
(p. 55).
Playback sound from the WAVE recorder is output via the MAIN OUTPUT 1/2 and the headphones.
fig.recorder01.eps
Main screen:
The main screen of the WAVE recorder. When you turn the
power on and press the [DAW/WAVE RECORDER] button,
this screen is displayed. This is where you record and
playback songs.
Finder screen:
Use this screen to perform operations such as listing,
selecting or deleting files.
If a different screen is displayed, pressing the
[DAW/WAVE RECORDER] button will return you
to the main screen.
If the SONAR V-STUDIO 100 is connected via
USB to your computer, pressing the [DAW/
WAVE RECORDER] button will not access the
WAVE recorder main screen.
WAVE recorder screen
Button is lit
Main screen
Finder screen
Press
VS-100_r_e.book 26 ページ ２００９年３月２５日 水曜日 午前９時３４分
To Next Page
Loading...
Need help?
General
