Roland TD-27 User Manual

6
Kit and Pad Copy Functions to Customise Your Setup
Watch The eDrum Workshop's COPY MENU video tutorial here.
If you wish to make any changes to any of these kits, it is recommended to create a duplicate of that kit first so that you
will retain an "original" version of the kit that you can recall if mistakes are made. You can do this quickly with the KIT COPY
menu.
Note: Do not reload the kit from the SD card to do this as it may load all of the samples again, taking up unnecessary space
on your module.
Kit Copy
1) Press the [KIT EDIT] button, then [F5] to access OTHER,
navigate right to the COPY icon and hit [ENTER]
2) Ensure that COPY KIT is highlighted and press [ENTER]
3) On the first User line, scroll to the kit you wish
to make a copy of, if required
4) On the second User line, scroll to the kit number
that you would like to create the copy on
(Ideally, use a free "User Kit" slot so that you do not overwrite a kit you wish to keep)
5) Hit [F5] to COPY the kit - you will be prompted to confirm your choice, press RIGHT then [ENTER] to confirm
If you would like to swap any of the pads from these kits around, you can use the PAD EXCHANGE option within the COPY
menu, outlined below.
Pad Exchange
1) Press the KIT EDIT button and press [F5] to access OTHER
2) Navigate right to COPY and press [ENTER]
3) Navigate right to COPY PAD and press [ENTER]
4) Scroll to the desired kit, then press [RIGHT] and
scroll to the first pad you would like to swap
5) Press [DOWN] then repeat step 4 for the second pad
6) Hit [F4] to EXCHANGE the pads
7) Repeat these steps for any other pads you would like
to exchange
Note: Be sure not to accidentally hit "COPY" as this will replace one pad with another.
If you would like to replace any instrument with one from another kit, you can copy one using the process below. You can
choose any pad or cymbal from any kit on your module or SD CARD.
Copy Pad
1) Press the KIT EDIT button and press [F5] to access OTHER
2) Navigate to COPY and press [ENTER]
3) Navigate to COPY PAD and press [ENTER]
4) Scroll to the desired kit, then press [RIGHT] and scroll
to the pad you would like to copy
5) Press [DOWN] then repeat step 4 for the destination
pad
6) Hit [F5] to COPY the pad from the first selected kit to
the second
7) Repeat these steps for any other pads you would like to copy or replace.

Roland TD-27 Specifications

General

Brand	Roland
Model	TD-27
Category	Drums
Language	English