Roland V-Piano User Manual

38
Playing
Equalizer settings are saved in system memory.
You can also store the equalizer settings in a setup. Refer to EQ Mode in “System settings (1. System)” (p. 80). If you’ve
chosen to store the equalizer settings in each setup, the equalizer settings will also be stored when you store the setup (p.
60).
1.
From the Tone screen, press the [FUNCTION] button to turn Function on.
The [FUNCTION] button will light.
2. Press the [F4 (UTILITY)] button.
3.
Use the [F3 ( ▲ )] or [F4 ( ▼ )] buttons to select “1. System.”
fig.Util02.eps
4.
Press the [ENTER] button or the [F1 (ENTER)] button to access the system setting screen.
5.
Press the [WRITE] button.
fig.Util-3.eps
6.
A confirmation message will appear. To save the equalizer settings, press the [F4 (OK)] button.
The equalizer settings, as well as any system parameters you’ve edited will be saved in System memory.
If you decide to cancel without saving, press the [F1 (CANCEL)] button.
Saving the equalizer settings
V-Piano_e.book 38 ページ ２００９年１月２８日 水曜日 午前９時１０分

Roland V-Piano Specifications

General

Damper pedal	Yes
Sound effects	Ambience
Tones quantity	256
Pedals quantity	3
Built-in speaker(s)	No
Maximum polyphony (notes)	128
Keyboard name	PHA III
Keys quantity	88 keys
Equalizer bands quantity	4
Recorder/sequencer number of tracks	1
AC input voltage	100 - 220 V
AC input frequency	50 - 60 Hz
Power consumption (max)	27 W
Cables included	AC, USB
Display resolution	240 x 64 pixels
Product color	Black

Weight and Dimensions

Depth	530 mm
Width	1411 mm
Height	166 mm
Weight	38200 g