Ruijie Reyee RG-ES206GS-P Series User Manual

RG-ES206GS-P Series Switches Hardware Installation and Reference Guide Preparing for Installation
7
2 Preparing for Installation
2.1 Safety Precautions
Caution
● To avoid personal injury and device damage, carefully read the safety precautions before you install the
device.
● The following safety precautions may not cover all possible dangers.
2.1.1 Installation Safety
 Keep the chassis clean, free from any dust.
 Do not place the device in walking areas.
 During the installation and maintenance, do not wear loose clothes, ornaments, or any other things that may
be hooked by the device.
 Cut off all the power supplies and unplug all power cords before placing the device in a rack or removing the
device from a rack.
2.1.2 Handling Safety
 Avoid handling the device frequently.
 Keep balance and prevent personal injuries when handling the device.
 Cut off all the power supplies and unplug all power cords before moving or handling the switch.
2.1.3 Electric Safety
 Observe local regulations and specifications during electric operations. Only personnel with relevant
qualifications can perform such operations.
 Before installing the device, check whether there are hidden risks in the operating environment of the device.
For example, check whether the power socket is grounded and whether the ground is wet.
 Be sure to know the location of the indoor emergency power supply switch before installing the device.
When an accident occurs, immediately cut off all power supplies.
 Do not maintain the device by yourself when the device is powered on.
 Make sure that the switch is powered off when you cut off the power supply.
 Do not place the switch in a wet position, and keep the switch away from liquid.
Caution
● Improper or incorrect electric operations may cause a fire, electric shock, and other accidents, and lead to
severe and fatal personal injury and device damage.
● Direct contact or indirect contact through wet objects with high voltage or mains power supply may be fatal.
● If the power supply system is equipped with a leakage protector (also referred to as leakage current switch
or leakage current breaker), the rated leakage action current of each leakage protector must be greater
than twice the theoretical maximum leakage current of all the power supplies in the system. For example,

Ruijie Reyee RG-ES206GS-P Series Specifications

General

Brand	Ruijie
Model	Reyee RG-ES206GS-P Series
Category	Switch
Language	English