Web-based Configuration Guide Network Settings
Note
The device at the NVR end does not involve channel width and RSSI, and only the device at the camera end
does.
3 Network Settings
3.1 Setting the Address of a LAN Port
The address of a LAN port is used only for login to the web page and does not affect the service network.
3.1.1 Allocating IP Addresses to All Bridges in the Network
Static IP address
On the Overview page, click IP Allocation.
Configuring static IP addresses for the entire network:
When a large number of devices in the network require static IP addresses, you can use IP Allocation to
automatically allocate a static IP address for each device. Click IP Allocation, set Internet to Static IP Address,
set Start IP Address, Subnet Mask, Gateway, and DNS Server, and click OK.
Hover the cursor over to view the help information.