R5 Series
5.4 DC Side Connection
Cross-sectional area of cables(mm²)
Outside diameter of the cables
(mm)
Table5.4 Recommended specifications of DC cables
DC connector is made up of the positive connector and the cathode connector
Figure 5.11 Positive connector
1. Insulated enclosure 2. Lock screw 3. Positive connector
Figure 5.12 Cathode connector
1. Insulated enclosure 2. Lock screw 3. Cathode connector
· Please place the connector separately after unpacking in order to avoid confusion for
connection of cables.
· Please connect the positive connector to the positive side of the solar panels, and connect
the cathode connector to the cathode side of the solar side. Be sure to connect them in right
position.