Name: Salus RT310RF
Brand: Salus
Rating: 5 (1 reviews)

To Next Page

To Previous Page

TEST / PAIRING

1 sec

8. Test the pairing process

Press TEST / PAIRING button to check

the connection with the receiver.

Antenna icon will display. Test mode

can take up to 9 minutes.

Press TEST / PAIRING button again

to return to the main screen.

The red LED and the green LED on the

receiver will begin to flash.

Receiver will go back to normal work

mode.

It is important to place the receiver and transmitter in places where nothing interferes with the radio signal. The range of communication between the

transmitter and the receiver in an open area is up to 60m. The radio transmission is inuenced by many factors that can shorten the working distance, such

as thick walls, drywall covered with aluminum foil, metal objects such as cabinets, general radio interference, etc. However, the range is sucient for most

domestic use. It is recommended to test the radio transmission between devices before mounting the regulator on the wall. The test can be performed by

changing the set temperature, i.e. by activating or deactivating the heating.

1 2 3

4 5

If you purchased an RXRT510 or RT310TX and intend pairing with other devices in the 5x5 range, please refer to the Receiver Units manual or the

relevant manuals available at www.salus-controls.eu