Samsung BD-P1580 User Manual

22_ connections
connections
This section involves various methods of connecting the Blu-ray Disc Player to
other external components such as a TV.
CONNECTING TO A TV WITH AN HDMI CABLE (BEST QUALITY)
Using an HDMI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player to
the HDMI IN terminal of your TV.
Press the input selector on your TV remote control until the HDMI signal from the Blu-ray Disc Player appears
on your TV screen.
If you have set the remote control to operate your TV (see pages 20~21), press the TV SOURCE button on
the remote control and select HDMI as the external source of the TV.
If the HDMI cable is connected or removed during playback of a CD-DA, the player will stop playing.
If the player is connected to your TV in HDMI 1080p output mode, you must use a High speed(category2)
HDMI cable.
Please do not use very thick HDMI cable which lacks flexibility when you are installing this unit.
1.
2.
•
M



HDMI cable
(not included)
01815A-BD-P1580-XEU-ENG.indb 22 2009-04-08 오후 4:47:37

Samsung BD-P1580 Specifications

General

Depth	199 mm
Width	430 mm
Height	54 mm
Weight	2200 g
Full HD	Yes
HDMI version	1.3
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD
AC input voltage	110 - 240 V
AC input frequency	50 - 60 Hz
Disc types supported	BD-R, BD-RE, CD-R, CD-RW, DVD+R, DVD+RW, DVD-R, DVD-RW
Playback disc formats	Blu-Ray video, CD audio
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Card reader integrated	No
USB 2.0 ports quantity	1
Audio formats supported	MP3
Image formats supported	JPG
Video formats supported	DIVX, H.264, MPEG2, VC-1
Operating temperature (T-T)	5 - 35 °C
Power consumption (standby)	0.27 W
Power consumption (typical)	30 W
Operating relative humidity (H-H)	10 - 75 %
Consumer Electronics Control (CEC)	Anynet+
Audio output channels	2.0 channels
Deep color support	-