ENGLISH
25
Purging the unit
'SPNGBDUPSZUIFVOJUJTTVQQMJFEBOETFUXJUIBQSFDIBSHFPGOJUSPHFOHBTJOTFSUHBT5IFSFGPSFBMMJOTFSUHBTNVTUCFQVSHFE
before connecting the assembly piping.
Unscrew the pinch pipe at the end of each refrigerant pipe.
3&46-5 : All inert gas escapes from the indoor unit.
t 5PQSFWFOUEJSUPSGPSFJHOPCKFDUTGSPNHFUUJOHJOUPUIFQJQFTEVSJOH
installation, do NOT remove the pinch pipe completely until you are
ready to connect the piping.
Gas refrigerant port
Liquid refrigerant port
t $POOFDUUIFJOEPPSBOEPVUEPPSVOJUTVTJOHQJQFTXJUIøBSFE
DPOOFDUJPOTOPUTVQQMJFE'PSUIFMJOFTVTFJOTVMBUFEVOXFMEFE
EFHSFBTFEBOEEFPYJEJ[FEDPQQFSQJQF$V%)1UZQFUP*40PS
6/*&/TVJUBCMFGPSPQFSBUJOHQSFTTVSFTPGBUMFBTUL1B
and for a burst pressure of at least 20700kPa. Copper pipe for hydro-
sanitary applications is completely unsuitable.
t 'PSTJ[JOHBOEMJNJUTIFJHIUEJòFSFODFMJOFMFOHUINBYCFOET
SFGSJHFSBOUDIBSHFFUDTFFUIFPVUEPPSVOJUJOTUBMMBUJPONBOVBM
t"MMSFGSJHFSBOUDPOOFDUJPONVTUCFBDDFTTJCMFJOPSEFSUPQFSNJUFJUIFS
unit maintenance or removing it completely.
MA Duct Type
t'PS."%VDU"$+/)%$)1BE$VTIJPO
should be removed before installing air conditioner.