Adjusting the computer image & Using USB
Adjusting the PC image
To adjust the computer image:
1
Press 6 or 5 to display PC menu, press ENTER to access.
2
Press MENU. The on-screen menu opens.
! H.Position — Moves the image right or left.
! V.Position — Moves the image up or down.
! Clock — Adjusts the sample frequency.
! Phase — Adjusts the focus of stable images.
! Auto Adjust — Automatically adjusts the image settings such as
position and phase.
Note: You can also press AUTO/STEREO on the remote control
to automatically adjust the image settings.
5
Press 6 or 5 to highlight an option, press 3or 4 to adjust the
level, or press ENTER to confirm. You can select:
3
To close the menu, press EXIT button.
Move
PC
Enter
V.Position
Clock
Auto Adjust
Phase
H.Position
50
50
0
50
Move
PC
V.Position
Clock
Auto Adjust
Phase
H.Position
50
50
0
52
Make sure that your TV is in VGA mode.
4
Notes about using USB
You can connect a USB device to your TV to view compatible JPEG pictures or play compatible MP3 audio.
Switching to USB mode
To switch to USB mode:
1
Make sure that you have connected the USB device to the USB port
on the side of your TV.
2
Press INPUT button.
3
Press 6 or 5 to select USB, then press ENTER.
Or you can press USB button on the remote control to switch to
USB mode directly.
Exit
Adjust
Return
Notes:
·Never remove the USB device or turn off the TV while using the USB device.
·It is recommended that you do not power on the TV with USB device connected, or the TV will respond to
POWER button slowly.
·It is recommended that you back up your USB device data.
·Some special USB device (such as portable hard disk)is not supported by this TV model. Therefore do not
connect portable hard disk to this TV.
.
·The JPEG picture viewer only supports JPEG format images(with “ jpg” file extensions) and not all JPEG files
are compatible with the TV.
.
·The MP3 audio player only supports MP3 format files(with “ mp3” file extensions) and not all MP3 files are
compatible with the TV.
·Please use English to name your files. Otherwise the file names can not be shown correctly.
22
Input
AV1
AV2
SVideo
VGA
HDMI1
HDMI2
USB
TV
Move Enter
Component
To Next Page
Loading...
Need help?
General
