Sanyo MAJ-R70 User Manual

EN-15
SD/MMC CARD OPERATION
• IMPORTANT INFORMATIONS •
- Copyright protection files cannot be
played back.
- Copyright protection files on SD/MMC
card are skipped automatically when
played back.
Before use
- Load an SD/MMC card (not supplied) with the
MP3/WMA file. (See Fig. 1b)
- Down load the MP3/WMA files into the SD/
MMC card (not supplied) from your PC.
Note:
Some cards cannot be used depending on its
structure.
Basic playback
1. Press the FUNCTION button to select “CARD
FUNCTION”.
Note:
- If the connection of the card is failed
or the unit cannot recognize the card,
“NO CARD” appears.
- If there’s no MP3/WMA file in the card,
or just some empty folders in the card,
“NO FILE” appears.
2. Press the
F or B button to select the de
sired MP3/WMA file.
3. Press
the R/ P button (or the SD R/ P button
on the remote controller) to start playback.
4. Press the STOPC/BAND(or the STOPCbutton
on the remote controller) to stop playback at
any time.
Temprarily stopping playback
Press the R/ P button (or the SD R/ P button on the
the remote controller).
To resume playback, press the button again.
Programmed playback
Up to 32 MP3/WMA files can be programme for
playback in any order.
- First, select “CARD FUNCTION” and con-
nect the CARD memory device you want pro-
gromme to the CARD socket of the until cor-
rectly.
- The same MP3/WMA file can be programmed
more than once.
1. Press the MEMO/CLK ADJ button (or the
MEMO/CLOCK button on the remote con-
troller) in the stop mode, “PROG.” appears.
2. Press the F or B button to select a
MP3/WMA file.
3. Press the MEMO/CLK ADJ button (or the
MEMO/CLOCK button on the remote con
troller).
4. Repeat steps 2-3 above to programme add-
itionan MP3/WMA files.
5. Press the R/ P button (or the SD button
on the remote controller) to start programmed
playback.
- When all programmed MP3/WMA files have
been played, it stops automatically.
- If you try to enter more than 32 MP3/WMA
fi les,”FULL” appears on the display.
CARD
R/ P

Sanyo MAJ-R70 Specifications

Power

power requirement	AC 240V, 50Hz
power consumption	40W
sub-woofer maximum power handling capacity	50W (RMS)

Audio Specifications

cd player speakers impedance	8 ohms
phones impedance	32 ohms
output power	10W X 2(at 8 ohms, 10% distortion)
nominal impedance	8 ohms
reception frequency FM	87.5~108.0MHz
reception frequency AM	522~1, 620KHz (9KHz steps)

Weight and Dimensions

main unit dimensions	170(W) x 272(D) x172(H) mm
main unit weight	2.57 kg
speaker dimensions	155(W) x 194(D) x 210(H) mm
speaker weight	1.5 kg/speaker
sub-woofer dimensions	170(W) x 256(D) x 172(H) mm
sub-woofer weight	3.15 kg