Sanyo MAJ-R70 User Manual

EN-23
Sleep timer
The sleep timer automatically turns off the pow-
er after a present time has elapsed. there are
9time periods vailable:90, 80, 70, 60, 50, 40, 30,
20, and 10 minutes,OFF.
Example: Select the sleep time of 40 minutes.
Press SLEEP/TIMER or TIMER/SLEEP on remote
control until the desired sleep time 40 minutes appears.
After several seconds, the original display re-
turns, “SLEEP” remains light on the display.
To release the sleep timer
Do one of the following:
- Press the SLEEP/TIMER or TIMER/SLEEP
on remote control , until OFF show on the
display, ”SLEEP” disappears.
- Turn off the power.
Timer priorities
The sleep timer has priority over the wake-up
timer. The power is switched off by the sleep
timer.
MAINTENANCE
Warning:
For your personal safety, be sure to discon-
nect the mains lead before processing with
any maintenance or cleaning.

Sanyo MAJ-R70 Specifications

Power

power requirement	AC 240V, 50Hz
power consumption	40W
sub-woofer maximum power handling capacity	50W (RMS)

Audio Specifications

cd player speakers impedance	8 ohms
phones impedance	32 ohms
output power	10W X 2(at 8 ohms, 10% distortion)
nominal impedance	8 ohms
reception frequency FM	87.5~108.0MHz
reception frequency AM	522~1, 620KHz (9KHz steps)

Weight and Dimensions

main unit dimensions	170(W) x 272(D) x172(H) mm
main unit weight	2.57 kg
speaker dimensions	155(W) x 194(D) x 210(H) mm
speaker weight	1.5 kg/speaker
sub-woofer dimensions	170(W) x 256(D) x 172(H) mm
sub-woofer weight	3.15 kg