Sanyo Mirro User Manual

32 2B. Settings
⽧ Display Settings (page 32)
⽧ Volume Settings (page 35)
⽧ Ringer Settings (page 36)
⽧ Messaging Settings (page 38)
⽧ Airplane Mode (page 41)
⽧ TTY Use With Sprint Service (page 41)
⽧ Using the Hearing Aid Device Compatibility Function
(page 43)
⽧ Phone Setup Options (page 43)
⽧ Security Settings (page 45)
Display Settings
Changing the Screen Saver
You can set a screen saver to display while in standby
mode.
1. Press > Settings > Display > Screensaver.
2. Select a screen saver option by pressing the
navigation key up or down, and select a screen
saver.
3. Press .
Changing the Brightness
You can adjust the brightness on the main screen.
When the Power Save Mode is on, and when the
Backlight Dim setting is Always Dim, you cannot
change this setting.
1. Press > Settings > Display > Brightness.
2. Highlight a brightness level and press .
2B. Settings

Sanyo Mirro Specifications

General

Brand	Sanyo
Model	Mirro
Category	Cell Phone
Language	English