22
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 67-68.
Basic Operation
①
②
③
④
⑤
⑥
⑦
⑧
Main Menu Sub-Menu
⑨
⑩
③ Image select
For computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green),
Colorboard and image 1 - 4 (p.32).
For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green), Colorboard
and Image 1- 4 (p.39).
④
Image adjust
For computer source, used to adjust computer image [Contrast, Brightness, Color temp., White balance (R/G/B),
Sharpness and Gamma] (pp.33-34).
For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp., White balance (R/G/
B), Sharpness, Gamma, Noise reduction and Progressive] (pp.40-41).
② PC adjust
Select Auto PC adj., Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area-H and Display area-V to adjust
the parameters to match with the PC input signal format (pp.29-31).
⑤
Screen
For computer source, used to adjust size of the image [ Normal, True, Wide, Full, Custom and Digital zoom +/– ] (pp.34-
35).
For Video source, used to set size of image [Normal, Wide and Custom] (p.42).
① Input
Used to select an input source from Computer 1, Computer 2 or Video (pp.27, 36-37).
⑥ Sound
Used to adjust the volume or mute the sound (p.24).
⑧ Information
Display the input source information: Input , H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp
counter , Power management, Key lock, PIN code lock and Remote control (p.57).
⑩ Guide
The key operation is displayed.
⑦
Setting
Used to set the projector’s operating configurations (pp.43-56).
⑨ Network
See the owner’s manual of “Network Set-up and Operation”.
To Next Page
Loading...
Need help?
General