34
Computer Input
Store
This projector has the picture screen resize function, which
enables you to customize the image size.
Screen Menu
Screen Size Adjustment
Provide the image to fit the screen size.
Normal
True
Provide the image in its original size. When the original
image size is larger or smaller than the screen size
(1024 x 768), the projector enters to the panning mode
automatically. Use the Point ▲▼◄►buttons to pan the
image. When adjusted, the arrows will turn red. When
reached to the correction limits, the arrows will disappear.
Full
Provide the full screen image.
Note:
•TheScreenMenu,only Normal and Custom can be operated, Wide will be disabled and displayed in gray
when 720p(HDTV), 1035i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p.28).
•Thisprojectorcannotdisplayanyresolutionhigherthan1920x1200.Ifyourcomputer’sscreenresolutionis
higher than it, reset the resolution to the lower before connecting to the projector.
•Theimagedatainotherthan1024x768ismodifiedtofitthescreensizeininitialmode.
•True, Full, and Digital zoom +/– are disabled and cannot be displayed when 480i, 575i, 480p or 575p is
selected in the PC System Menu (p.28).
1
2
To store the adjusted data, select Store and press the Point
►ortheSELECTbutton.UsethePoint▲▼ buttons to
select one from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select Yes. Stored
data can be called up by selecting an Image (1–4) in the
Image Mode Selection on page 32.
Wide
Provide the image to fit the wide video aspect ratio (16:9) by
expanding the image width uniformly. This function can be
used for providing a squeezed video signal at 16:9.
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Screen and
then press the Point ►or the SELECT button.
Use the Point ▲▼buttons select the desired item and
then press the SELECT button .
A confirmation box appears and
then select Yes.
To Next Page
Loading...
Need help?
General